Quick Answer: Brown water usually comes from disturbed sediment in the water main, rusty pipes, a corroded water heater, or high mineral content in your supply. Most cases can be diagnosed by checking whether the issue affects one faucet or the whole house, and comparing hot versus cold water. Many fixes are simple, like flushing your lines, but persistent brown water may signal aging pipes that need a professional inspection.
Turning on the tap to fill a glass of water and watching it come out murky brown is enough to make anyone pause. It’s an alarming sight, but the good news is that brown water is often easier to explain (and fix) than you might think. Let’s walk through what’s happening and how to get your water running clear again.
Why Is My Water Brown?
There are a handful of common culprits behind discolored tap water, and most trace back to sediment, rust, or minerals making their way into your pipes.
Sediment Disturbed in the Water Main
Cities regularly perform maintenance on water mains, like flushing lines or repairing a break nearby. This can stir up sediment that’s been sitting at the bottom of the pipes for years, sending it straight into your home’s water supply.
Rust or Corrosion Inside Your Home’s Pipes
If your house has older galvanized steel pipes, rust can build up on the inside over time. As water flows through, it picks up tiny rust particles, giving it that telltale brown or orange tint.
Water Heater Sediment or Corrosion
Your water heater tank collects sediment over the years. When that sediment gets stirred up, or when the tank itself starts corroding, it can send discolored water through your hot water lines.
Minerals in the Water Supply
High levels of iron or manganese in your local water supply can also cause brown or reddish water, especially if you’re on well water or live in an area with naturally mineral-rich groundwater.
How to Figure Out Where the Brown Water Is Coming From
Before jumping to a fix, it helps to narrow down the source.
Check more than one faucet. Turn on a few different faucets around your house. If only one is affected, the issue is likely localized to that fixture or the line feeding it. If it’s happening everywhere, the problem is probably bigger, like your main line or water heater.
Compare hot versus cold water. This is one of the fastest ways to narrow things down.
| What You Notice | Possible Cause |
| Brown hot water only | Water heater |
| Brown cold water only | Supply line or municipal water |
| Brown hot and cold | Main water supply or household piping |
| One faucet only | Faucet, aerator, or nearby supply line |
| Appeared after water was shut off | Sediment knocked loose, usually temporary |
Think about what recently changed. Did the city do repairs nearby? Did you have plumbing work done? Was your water shut off and turned back on? These clues often point directly to the cause.
How to Fix Brown Water Coming From Your Faucet
Once you’ve got a sense of what’s going on, here’s how to tackle it.
- Flush your cold water lines until clear. Run your cold water for 10 to 15 minutes. If the sediment was temporary (like after a city repair), this often solves the problem right away.
- Clean the faucet aerator. Unscrew the small mesh screen at the tip of your faucet and rinse out any trapped debris. This is a quick fix if only one faucet is affected.
- Flush the water heater, or have a pro do it. Sediment builds up at the bottom of your tank over time. Draining and flushing it (or scheduling a professional flush) can clear up brown hot water fast.
- Replace corroded supply lines or fixtures. If the issue is isolated to one area, swapping out an old supply line or fixture may be all it takes.
- Have aging pipes inspected. If brown water keeps coming back or affects your whole house, it may be a sign that your pipes are corroding from the inside. A video inspection from a licensed plumber can confirm what’s going on before you invest in repairs or repiping.
- Consider water treatment for mineral-heavy supply. If iron or manganese are the ongoing cause, a whole-house filtration or softening system can keep your water clear long-term.
When to Call Right Solution Plumbing
If you’ve flushed your lines, cleaned your aerator, and still find yourself asking “why is my water brown,” it’s time to bring in a professional. Right Solution Plumbing can pinpoint whether the issue is your water heater, aging pipes, or something else entirely, and get it fixed right the first time.
Frequently Asked Questions
Why is my water brown for a few seconds and then turn clear?
This is usually caused by sediment that’s been temporarily disturbed, often from nearby city water main work or your water being shut off and turned back on. It typically clears up after running the tap for a few minutes.
Is brown faucet water safe to drink?
It’s best to avoid drinking brown water until you know the cause. While sediment alone isn’t always harmful, it can indicate rust or bacteria in the system, so it’s safer to wait until the water runs clear or have it tested.
Can a failing water heater cause brown water without leaking?
Yes. A water heater can develop internal rust or sediment buildup that discolors your hot water long before any visible leak appears.
How can I tell if brown water is coming from the city or my own plumbing?
Check with neighbors to see if they’re experiencing the same issue. If they are, it’s likely a municipal problem. If it’s just your home, the cause is probably somewhere in your own plumbing system.
Does brown water mean my pipes need to be replaced?
Not always. Many cases resolve with flushing or minor repairs. However, if brown water is a recurring issue throughout your home, it may point to corroding pipes that need a closer look.
Back to Blog